Mdfb Wall Mounting; Door Phone/Lock Programming - Toshiba STRATA DK14 Installation And Maintenance Manual

MDFB Wall Mounting

1. Remove the screw from the bottom
of the cover. Detach the cover from
the base and metal frame (see
Figure 11-24).
2. Position the metal frame and base
to the mounting surface and secure
with two one-inch panhead wood
screws.
3. Attach cover to the metal frame and
base and secure with the screw
which was removed in Step 1.
MDFB Volume Control Adjustments
1. Remove the screw from the bottom
of the MDFB cover.
2. Detach the cover from the base and
metal frame.
3. The volume level is changed by a
screw adjustment on the back of the
MDFB. Turn the screw with a flat-
headed screwdriver while ringing
the MDFB or while on a call with
it. The volume level will change as
the screw is turned.

Door Phone/Lock Programming

Program 39: Assigns door phone and door lock buttons to digital telephones.
Program 77-1: Assigns DDCBs or HDCB to ports, door phone ringing over external page during
the NIGHT mode, and door lock activation time.
Program 77-2: Busy out unused MDFB positions, identifies which DDCBs support the door lock
option, and sets the door phone to ring one or five times.
Each DDCB/HDCB door lock assignment will reduce the system door phone capacity by
Note
one (see Chapter 12 – Peripheral Installation for HDCB, DDCB, and PIOU/PIOUS door
lock installation information).
Program 79: Assigns door phone-to-station ringing assignments.
Program * 79: Assigns which [DN] flashes on telephones assigned in Program 79.
Strata DK I&M 6/00
Base
3.25
inches
Two Wall
Mounting Holes
Door Phone
Figure 11-24 Door Phone (MDFB)
Station Apparatus
Lock Control Unit and Door Phone
Metal Frame
1494
11-31