Toshiba STRATA DK14 Installation And Maintenance Manual page 521

Lock Control Function
Only one door lock control is available using an optional PCB (PIOU, PIOUS, or PEPU)
Note
and only the optional PCB with the lowest Program 03 Code (41, 42, or 43) will provide
the door lock function.
1. Set Program 77-1 LED 07 to On to configure the PIOU, PIOUS, or PEPU PCB for the door
lock control function (see
2. Set Program 77-1 LED 20 to Off for a three-second door lock activation time, or set LED 20 to
On for a six-second door lock activation time.
3. If using a PIOU or PEPU, set the P10 jumper plug on the PIOU or PEPU to the MAKE or
BREAK position, as required:
o MAKE – Shorts the normally open contacts (pins 7 and 32) when a station's door lock
button is pressed.
o BREAK – Opens the normally closed contacts (pins 7 and 32) when a station's door lock
button is pressed.
...or
If using a PIOUS, solder the W1 jumper plug on the PIOUS to the MAKE or BREAK
position, as required:
o MAKE – Shorts the normally open contacts (DET and DER) when a station's door lock
button is pressed.
o BREAK – Opens the normally closed contacts (DET and DER) when a station's
/RFN
button is pressed.
4. See Figure 12-9
MDF as required for the door lock control function.
Note
assigned to digital and
electronic telephones in
Program 39 with Code 71.
K1/P10 (24VDC, 1.0 amp Max.)
1509
Figure 12-9 Door Lock Control Option (PIOU/PIOUS/PEPU)
Strata DK I&M 6/00
Figure 12-9).
for wiring/interconnecting details. Connect the PIOU, PIOUS, or PEPU to the
PIOU/PEPU
B
M
Door Lock 0 Button
PIOUS
Break
K1
Make
Relay Control Options and Door Lock Control
25-Pair
Amphenol
MDF
DET PIN 34, R-BR
17
P10
PIN 9, BR-R
18
DER
See Program 77-1,
LED 07, 20
for Relay Options
MDF
DET
W1
DE
DER
Terminal on Front Edge of PCB
Peripheral Installation
'RRU
To Door Lock
To Door Lock
12-13