Toshiba STRATA DK14 Installation And Maintenance Manual page 99

Program *52: Assigns stations as owners of Caller ID CO lines. These stations will store the Caller
ID telephone numbers received on abandoned (not answered) calls for the lines which they own.
Typically all common CO lines are assigned to one designated telephone or attendant console and
private lines are assigned to individual private line telephones.
A station must also be allocated with Caller ID/ANI storage memory in Program *51 to
Note
store abandoned call telephone numbers.
Program 39, Code 462: Assigns the Caller ID/ANI Lost Call Auto Dial button to LCD telephones
that store Caller ID and/or ANI abandoned call telephone numbers. A user can scroll through the
stored abandoned call phone numbers and auto dial the selected number using this button.
Program 60-1, Key 01: Determines which information will be sent out the system SMDR port,
e.g., system Account Codes or CLID and/or ANI telephone numbers.
➤
Turn LED 01 On if CLID and/or ANI information should be sent out the SMDR port.
➤
Turn LED 01 Off if Account Codes information should be sent out the SMDR port.
Note The system will initialize with LED 01 Off, e.g., Account Codes information will be sent
out the SMDR port.
Figure 3-20 DK40i Caller ID Interface Unit (TCIU2)
Table 3-6 TCIU2 Controls, Indicators, and Connectors
Control/Indicator/Connector
P20
P21
P22
Strata DK I&M 6/00
P22
Type of Component
5-pin plug
9-pin plug
9-pin plug
Printed Circuit Board (PCB) Installation
P20
1335
P21
Description
To P120 of TCOU
To P121 of TCOU
To P122 of TCOU
DK40i Installation
3-29