Toshiba STRATA DK14 Installation And Maintenance Manual page 497

Access Codes
Access Codes are used by the DK424 for dialing features. The access codes (dialing plan) must
match to allow the PC Attendant to dial the correct code to activate certain features. This is
normally left at default, but if Program 05 is modified, corresponding changes are needed here. If
no changes were made to Program 05, skip these steps.
➤ To change access codes to match Program 05
1. From the DK424 PC Attendant
Configuration screen, click the
Access Code button.
2. In the Access Code dialog box,
click OK after making your
selections.
Class of Service
The Class of Service settings should
reflect the call states and features
which are anticipated to be used the
most often.
1. From the DK424 PC Attendant
Configuration screen, click the
Class of Service button.
These contain two items from
Program 10 for setting the
operation for Tone First or Voice
First when calling a [DN] on the
system and for setting the system to
support two or three Night Transfer
modes. The Class of Service for the
port assigned to the PC attendant
console must match Program 30 of
the DK424.
2. In the Class of Service dialog box,
click OK.
DNIS Trunks
To allow the DNIS feature to work properly, the PC attendant console needs to know whether
trunk ports are being used for DNIS number translation or for CO line circuits. This assignment
must follow Program 17 LED 05 in the DK424. (LED ON requires the line to be marked as
DNIS.)
Strata DK I&M 6/00
Station Apparatus
PC Attendant Console
1025
1028
11-47