Toshiba STRATA DK14 Installation And Maintenance Manual page 498

Station Apparatus
PC Attendant Console
➤ To set DNIS trunk identification
1. From the DK PC Attendant
Configuration screen, click the
DNIS button.
2. From the Class/ANI DNIS Trunk
Assignment dialog box, click OK
when done.
➤ To exit Telephony Drivers and Telephony Setup
1. From the DK PC Attendant Configuration screen, click Close to exit the Telephony Drivers
box.
2. Click Close again to exit the Telephony Setup box.
PC Attendant Setup
After Telephony Setup has been completed, then a series of items needs to be configured within
the main program. System Settings in the main program can be easily changed since they do not
require a corresponding change in the DK424 in order to function. Most of these items are found
under the Main Menu heading of Setup.
➤ To access System Settings
1. From the Main Menu, select Setup.
2. Click OK or enter a password.
Initially, you can click OK, without
entering a password. Store a password
if you need to ensure that these settings
cannot be changed without
authorization. Once a password is
entered, you must enter that password
to proceed.
System Settings
Once the password screen is entered,
the System Settings menu is presented.
The two menu items, System Code
Settings and Change Station User
Name, allow the Attendant to change
System Administration settings in the
DK424. Within System Settings, the
Attendant can customize the labels for
only three menu items: Door Phone,
Door Unlock, and Paging.
The following sections cover the main
settings needed to make the console
work.
11-48
1029
1030
1031
Strata DK I&M 6/00