Toshiba STRATA DK14 Installation And Maintenance Manual page 580

Peripheral Installation
PC/Data Communications Interface Units
o
2. Make sure that the auto dial application software is installed on the PC root directory and that
the communication parameters of the PC and application software are set to the same values.
Note
3. Make sure that a dialing directory consisting of names and telephone numbers you wish to
auto dial is installed within the application software (include the appropriate Strata CO line
access code prefixing each telephone number).
➤ To auto dial using Sidekick from the PC keyboard
1. Press the Alt and Ctrl keys simultaneously. The PC screen displays the Sidekick menu
window.
2. Press F5 twice (Sidekick prompts "search for INITIALS:" to display on the PC's
screen).
3. Type the initials or name of the person or organization you wish to auto dial.
4. Press Enter. Sidekick finds and highlights the desired name/number.
5. Press Enter again.
o
o
o
6. Take the DKT's handset off-hook at any time after the phone number is dialed. Press the
Spacebar to release the
speakerphone.
Note
➤ To terminate the call anytime
1. If off-hook, press the Spacebar and place the DKT handset on-hook.
2. If talking via the speakerphone, press the Spacebar.
12-72
'DWD &DOO
Program 39: Port 001.
If the PDIU-DI is only used for the PC auto dial application, the
5HOHDVH
buttons are unnecessary.
If using an RPCI-DI, it may be necessary to switch the RPCI from the TAPI mode to the
Data Communications Mode before proceeding with Step 3. To place the RPCI into the
data communications mode from the PC keyboard: Set Num Lock to On and type 240
while holding the Alt key down (this is HEX F0). If in the data communication mode
ATC0 will switch the RPCI-DI back to the API mode.
DKT/PDIU-DI 201 seizes the CO line and auto dials the selected telephone number.
The LEDs of the DKT's Data Call and CO line 001 buttons are On (if assigned in Program
39).
Dial tone, DTMF tones, and ringback or busy tones are audible from the DKT's speaker.
'DWD &DOO
Speakerphone model only: pressing the Spacebar when using the speakerphone feature
disconnects the call.
'DWD 5HOHDVH
(556) and
button, or remain on-hook and use the DKT's
(554) buttons are optional.
'DWD &DOO 'DWD
and
Strata DK I&M 6/00