Pdku2 - Digital Telephone Interface Unit; Pdku2 Hardware Options; Pdku2 Installation; Pdku2 Programming - Toshiba STRATA DK14 Installation And Maintenance Manual

Universal Slot PCBs
PCB Chapter Layout
PDKU2 – Digital Telephone Interface Unit
System:
Circuits per PCB:
Interfaces with:
Older Version(s):

PDKU2 Hardware Options

PDKU2 does not have to be configured for any option. Refer to
instructions on how to connect digital telephones, DDCBs, and DDSS consoles to the PDKU2, as
well as how to upgrade digital telephones with these options: an Integrated Data Interface Unit
(PDIU-DI, RPCI-DI), a Speaker Off-hook Call Announce upgrade (DVSU), and a Headset/Loud
Ringing Bell Interface (HHEU). Refer to
alone Data Interface Unit (PDIU-DS) to the PDKU.
Note
There are no controls or indicators on the PDKU

PDKU2 Installation

1. Insert the PDKU2 (component side facing right) into the appropriate slot, and apply firm, even
pressure to ensure proper mating of connectors. (For DK40i, PDKU2 must be installed per
tables in
2. After installing the PDKU, gently pull the PCB outward. If the connectors are properly mated,
a slight resistance is felt.

PDKU2 Programming

Program 03
o Specify Code 61 to indicate a station line PDKU2.
o Specify Code 62 to indicate a PDKU2 supporting Speaker Off-hook Call Announce (OCA)
and/or DIUs and RPCI-DI Data mode.
o Specify Code 64 to indicate a PDKU2 supporting a DDSS console, Speaker OCA, DIUs, and
RPCI-DI Data mode.
o For RPCI-DI TAPI mode only and Handset OCA, code 61 can be used and the PDKU2 can be
in any universal cabinet slot.
Note
Programs 20, 21, and 22: Configures DIUs and RPCIs.
Programs 28 and 29: Digital Direct Station Selection Consoles (DDSS) assignments.
9-10
DK40i Expansion KSU, DK424, DK424i
eight digital telephone circuits
digital telephones (with or w/o RPCI-DI or ADM)
DDSS console (circuit 8 only)
PDIU-DS (must have dedicated circuit)
DDCB (circuit 5 only–ports 004, 012, 020, and 028)
cordless digital telephones (DKT2004-CT, DKT2104-CT)
DKT2001 single line digital telephones (see Note below)
PDKU1 (identical to PDKU2 except it does not support continuous DTMF tones
w/DKT2000-series telephones, DIUs can only be connected to circuits 1~7)
DKT2001 telephones do not support HHEUs, DADMs, DDSSs, RPCI-DIs, or DVSUs.
Chapter 2 – DK40i
If there are no PDKU2 options, Program 03 can be skipped, and Program 91-1 or 91-9 can
be run instead.
Chapter 12 – Peripheral Installation
(Figure
Configuration.)
Chapter 11 – Station Apparatus
to connect the Stand-
9-4).
Strata DK I&M
for
6/00