Ip Multicast Vlan Replication; Ip Multicast Vlan Replication Global Settings - D-Link xStack DGS-3400 Series Reference Manual

x Stack
The following parameters can be configured or viewed:
Parameter
Unit
From / To
Analyzer Server ID
(1-4)
Polling Interval (20-
120 sec)
Click Apply to implement the changes.

IP Multicast VLAN Replication

The following windows allow the user to configure the settings for IP Multicast VLAN Replication on the Switch.

IP Multicast VLAN Replication Global Settings

This window is used to enable the global settings for IP multicast VLAN replication on the Switch.
To view this window, click Administration > IP Multicast VLAN Replication > IP Multicast VLAN Replication Global
Settings, as shown below.
Figure 2 - 146 IP Multicast VLAN Replication Global Settings window
®
DGS-3400 Series Layer 2 Gigabit Ethernet M anaged Sw itch
Figure 2 - 145 sFlow Counter Poller Settings - Edit window
Description
Select the unit you wish to configure.
Choose the beginning and ending range of ports to be configured for counter polling.
Enter the previously configured Analyzer Server ID to state the device that will be receiving
datagrams from the Switch. These datagrams will include the counter poller information taken
using the polling mechanism configured here.
Users may configure the Polling Interval here. The switch will take a poll of the IF counters
every time this interval reaches 0, and this information will be included in the sFlow datagrams
that will be sent to the sFlow Analyzer for examination. Ticking the Disabled check box will
disable the counter polling for this entry.
126