Table of Contents
Advertisement
•
10-bit image processor electronics with modular design
•
All video formats can be resized to full screen either horizontally or vertically while maintaining
aspect ratio.
•
The projector can be operated using any of the following:
•
The built-in keypad, the infrared (IR) remote keypad, a wired remote keypad, or a PC/
device using serial communications (Ethernet or RS232)
•
A web page using Ethernet, or from a PC or device using a wireless USB dongle
How the projector works
The Inspire Series projector accepts a variety of input signals for a wide range of commercial
projection applications.
Designed with blue solid-state illumination light sources and phosphor technology, the red, green
and blue color elements are modulated by one Digital Micromirror Device (DMD) panel responding
to incoming data streams of digitized red, green, and blue color information. As these digital
streams flow from the source, light from the responding on pixels of the DMD panel is reflected,
converged, and then projected to the screen through projection lenses, where all pixel reflections
are superimposed in sharp full-color images.
List of components
This projector comes with all the items listed below. Check to make sure your package is complete.
If anything is missing, contact your dealer.
•
IR remote keypad
•
Product Safety Guide
•
Power cord
•
Lens installed into the projector
The list of the optional Accessories:
•
Christie One Mount (P/N: 108-506102-XX)
•
Dust filter
Inspire Series Installation and Setup Guide
020-002097-01 Rev. 1 (11-2023)
Copyright ©2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Introduction
10
Advertisement
Table of Contents
