How The Projector Works; List Of Components - Christie Inspire Series User Manual

• A wide range of connectivity including HDMI, VGA, HDBaseT, and 3D input/3D output
• 360 degrees projection enabled by laser light source
• Compatible with HDR content
• All video formats can be resized to full screen either horizontally or vertically while maintaining
aspect ratio
• The projector can be operated using any of the following:
• Built-in keypad
• Infrared (IR) remote keypad
• Wired remote keypad
• PC/device using serial communications (Ethernet or RS232)
• A web page using Ethernet or from a PC or device using a wireless USB dongle (optional)

How the projector works

The Inspire Series 4K projector accepts a variety of input signals for a wide range of commercial
projection applications.
Designed with solid-state illumination light sources and phosphor technology, the red, green and
blue color elements are segmented through a phosphor wheel and then modulated by one Digital
Micromirror Device (DMD) panel responding to incoming data streams of digitized red, green and
blue color information. As these digital streams flow from the source, light from the responding on
pixels of the DMD panel is reflected, converged and then projected to the screen through projection
lenses, where all pixel reflections are superimposed in sharp full-color images.

List of components

This projector comes with all the items listed below. Check to make sure your package is complete.
If anything is missing, contact your dealer.
• IR Remote
• Product Safety Guide
Inspire Series 4K User Manual
020-002098-01 Rev. 1 (09-2023)
Copyright © 2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Introduction
15