Optional Input Modules - Christie CineIPM-2K User Manual

The following optional input modules can be installed in either option slot in the Cine-IPM 2K (
Contact your dealer for a complete and up-to-date listing.
RGB500 Input Module
38-804606-xx
RGB400BA Input Module
38-804610-xx
RGB400 Active Loop-Thru
Input Module
38-804607-xx
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)

Optional Input Modules

NOTE: Any audio connectors shown are non-functional in the Cine-IPM 2K.
This module receives analog RGB input signals from computers or other RGB source
devices.
RGB500 Features
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync), up to 500 MHz bandwidth
◊
BNC connectors for RGB signal inputs
Connect three-, four-, or five-wire RGB video signals of up to 400 MHz bandwidth—
these are signals typically produced by high-resolution computer or workstations. The
buffering capability of the module enables the incoming signal to be sent to a remote
destination. Inputs are 75
RGB400BA Features
◊
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
◊
BNC connectors for RGB signal inputs
◊
Buffered signals to a remote destination
This module receives analog RGB input signals from computers or other RGB source
devices. Video inputs are 75
through to another display device.
Σ terminated.
Σ terminated. Video outputs provide buffered loop-
A p p e n d i x E
or ).
INPUT 5 INPUT 6
E-1