Optional Input Modules - Christie Roadster S+12K Setup Manual

The following optional input modules can be installed in either option slot in the projector (
). Contact your dealer for a complete an up-to-date listing.
6
NOTES: 1) Optional interface modules can be hot-swapped into a running projector. 2) Any audio
connectors shown are non-functional in this projector.
Dual SD/HD-SDI
38-804656-xx
RGB500 Input Module
38-804606-xx
Roadster, Matrix WU, Mirage S+/HD/WU Setup Guide
020-100342-02 Rev. 1 (04-2011)

Optional Input Modules


NOTE: Standard with Roadster models. Refer to Section 2.
The Dual SD/HD-SDI Module enables incoming SD or HD serial digital data to be
tiled across multiple screen displays, overlapped for extra-bright displays, or
distributed to additional projectors for multiple, same-image screens.
Dual SD/HD-SDI Features

Accepts and decodes up to two serial digital inputs

SMPTE 292, 259M and 372 compatible

Outputs up to two 10-bit video signals

Provides input(s) to output(s) loop-through capability

Supplies interchangeable inputs as part of the Picture-in Picture display

The RGB500 Input Module receives analog RGB input signals from computers or
other RGB source devices.
A p p e n d i x D
or
INPUT 5 INPUT
D-1