Quantum scalar i2000 User Manual page 354

Scalar i2000 User's Guide
Accessing the LMC Applet
After verifying that the host computer meets the software requirements
and has network access to the library, access the LMC applet and log on.
1 On the host computer, point your web browser to the IP address of
the library.
The first time you access the LMC applet it is downloaded to the host
computer. Downloading the applet can take several minutes depending
on the speed of the network. Once the applet is downloaded, it is stored
on the host computer and does not need to be downloaded again.
If a security warning appears asking if you are sure you want to run the
applet, click Run or Yes.
The Scalar i2000 Logon dialog box appears.
2 In the Name text box, type the name of the user or administrator
account with which you want to log on. If you want to log on with the
default administrator account, type admin.
• User names and passwords are case-sensitive.
Note
• Only one administrator at any given time can be
logged on to the library.
• If you want to log on using the default
administrator account (admin), and you do not
remember the password, contact technical
support to reset the password.
3 In the Password text box, type the password for the user or
administrator account.
Chapter 6 Running Your Library
Logging On and Off
6
341