Monitoring Drive Status - Quantum scalar i2000 User Manual

Monitoring Drive Status

Element Description
Type The type of drive.
WWN For a Fibre drive only, the World Wide Name of the drive.
SCSI ID For a SCSI drive only, the SCSI ID of the drive.
RAS The status of the drive as reported by the RAS system (for example, Good or
Failed).
Firmware level The firmware level of the drive.
Media ID The barcode of the loaded cartridge.
Scalar i2000 User's Guide
The Drive Status dialog box displays status information for tape drives in
5
the currently selected partition. If you are working in the physical library,
status information for all drives appears. You can perform this procedure
while viewing either the physical library or a partition.
1 Click Monitor→ Drives.
The Drive Status dialog box appears.
The following table describes the elements on the Drive Status dialog box.
Chapter 5 Maintaining Your Library
Monitoring the Library
208