Changing The Library's State - Quantum scalar i2000 User Manual

Changing the Library's State

Scalar i2000 User's Guide
You can take the physical library or any of its partitions online or offline.
Some library functions require that the physical library or partitions be in
an online or offline state. You also can shut down the physical library from
the library's touch screen.
Shutting down the library only prepares it to be
Note
powered off. You will use the shutdown procedure
in some circumstances to prepare the library for
remove and replace procedures. For more
information about shutting down the library, see
Shutting Down/Rebooting the Library
page 393.
Taking the Physical Library or a Partition Online or Offline
To take the physical library online or offline, change its mode.
1 Make sure that you are viewing the physical library or the partition
that you want to take online or offline. From the View menu, click the
name of the physical library or the appropriate partition.
2 Click Operations→ Change Mode.
The Change Library Mode dialog box appears with the current state of the
physical library or partition shown.
Chapter 6 Running Your Library

Changing the Library's State

on
6
380