Configuring Library Security; Accessing The Security Configuration Dialog Box - Quantum scalar i2000 User Manual

Configuring Library Security

n
Accessing the Security
Configuration Dialog Box
Scalar i2000 User's Guide
You can change the library's security settings, including enabling or
disabling network services, enabling or disabling remote access to the
library, setting up firewall access for server callbacks to remote clients, and
enabling or disabling SNMP or SMI-S access. You can configure the
library's security while viewing either the physical library or a partition.
Note
The Security Configuration dialog box enables you to restrict external
users and various remote services from accessing the library through the
Ethernet port on the MCB.
4
1 Log on as an admin user.
2 Click Setup→ Security.
The Security Configuration dialog box appears with the Services tab
displayed.
Changing security configuration settings using the
remote client might cause a loss of connectivity. If
this happens, use the local touch panel to reset the
security configuration settings and restore remote
connectivity.
Chapter 4 Configuring Your Library
Configuring Library Security
186