Quantum scalar i2000 User Manual page 291

Scalar i2000 User's Guide
Both tests enable you to select a range of modules and racks to test. For
example, if you have a four-module library, you can select to test only
modules 3 and 4. The frame test performs the same operations as the
installation verification test, except there are frame and rack range
parameters available.
FRU Operational Tests
The FRU operational tests enable you to verify the replacement of a FRU.
When the FRU test is selected, you can select any of the following
individual tests:
• Accessor assembly
• Picker assembly
• Drive sled assembly
• I/E station assembly
• Scan barcode
When one of the subtests is selected, you may be prompted to enter
additional information. For example, the Select FRU dialog box has tabs
along the top to select individual drives, I/E stations, and scratch tapes.
Chapter 5 Maintaining Your Library
Maintenance Actions
5
278