Quantum scalar i2000 User Manual page 172

Scalar i2000 User's Guide
6 Using the text boxes provided, provide the following required
information:
• In the Name text box, type a host device name.
• From the Type drop-down list, click the appropriate host type by
operating system.
• In the Port text box, type the host device port.
• In the WWN text box, type the host device World Wide Name
(WWN).
7 Click OK.
Modifying an FC Host
1 With the host selected in the FC Host dialog box, click Modify.
The Host Configuration dialog box appears.
2 As necessary, change the information in the Name and Port text
boxes, and then click the appropriate host type by operating system
from the Type drop-down list. You cannot change the World Wide
Name (WWN).
CAUTION
3 Click OK.
Chapter 4 Configuring Your Library
You also must make the necessary physical
changes to the name, operating system, or port
connection.
Configuring Devices
4
159