Quantum scalar i2000 User Manual page 272

Scalar i2000 User's Guide
If the save operation succeeds, a message appears that indicates the name
of the image file that was saved to the remote file system. If the save
operation does not succeed, a message appears that describes the error
that occurred.
Saving a Local Rescue Image
Use the Save Rescue command to save a library configuration rescue
image locally on the library's file system. To make sure that the image
captures all library configuration changes, you should save the image
often.
1 Log on as an administrator from the remote client or from the
library's touch screen.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 Click Tools→ Save/Restore.
The Save and Restore Library Configuration dialog box appears.
4 Click Save Rescue.
The save rescue operation starts.
If the save rescue image operation succeeds, a message appears that
indicates that the rescue image file was saved to the library file system.
The rescue image timestamp displayed on the Save and Restore Library
Configuration dialog box will be updated to indicate that the file has
changed.
If the save rescue operation does not succeed, a message appears that
describes the error that occurred.
Restoring Library Configuration
Use the Restore command to restore a library using a configuration image
that is saved on a remote file system.
If library configuration has occurred since the last time the image was
saved, those changes will be lost when the older configuration is restored.
The restore operation will succeed, but you will then need to reconfigure
the library, including the partitions and mappings. Therefore, it is
important to save the local rescue and/or remote restore image
periodically, especially following hardware configuration changes.
Chapter 5 Maintaining Your Library
Maintenance Actions
5
5
259