Quantum scalar i2000 User Manual page 193

Scalar i2000 User's Guide
Assigning Cleaning Magazines and Importing Cleaning Media
To configure the library for drive cleaning, first assign one or more
magazines as cleaning magazines, and then import cleaning media.
At least one magazine must be assigned for
Note
cleaning before you can import cleaning media.
Also, only magazines that do not belong to a
partition can be assigned for cleaning.
1 Insert one or more pieces of cleaning media into the I/E station and
close the I/E station door.
Use a standard barcode label for cleaning media. Barcode numbers do not
require a specific prefix or suffix.
2 Make sure that you are viewing the physical library. From the View
menu, click the name of the physical library.
3 On the menu bar, click Setup→ Drive Cleaning.
The Drive Cleaning Configuration dialog box appears.
Click a magazine slot or a piece of media to select it. Details about the
selected slot or media appear under Information, including the type of
media, barcode number, location, and the number of times the media has
been mounted in a drive.
Chapter 4 Configuring Your Library
Configuring Drive Cleaning
4
180