Saving And Restoring Library Configuration - Quantum scalar i2000 User Manual

Saving and Restoring
Library Configuration
Scalar i2000 User's Guide
Note
The library's save and restore capabilities enable you to save a remote or
5 local copy of configuration settings for the library's drives, I/O blades,
and partitions, including the allocation of drives, storage magazines, and
I/E station magazines to each partition. If the library's current
configuration becomes lost or unstable, you can use the LMC to apply the
locally or remotely saved configuration image, which eliminates the need
to reconfigure the entire library to bring it back to its original state.
The Save and Restore Library Configuration dialog box enables you to:
• Save a library's configuration settings as a remotely or locally stored
image
• Restore, revert, or rescue the library by applying a remotely or locally
stored image of a library's configuration settings
CAUTION
Types of Configuration Image Files
There are three types of configuration images that correspond to the
Restore, Rescue, and Revert commands:
• The restore image is stored on a remote file system and is created any
time you use the Save command. You might restore the library's
configuration, for example, if the library's locally saved configuration
is lost because the compact flash memory on the Management
Use the Physical Library command on the Setup
menu to disable or enable automatic inventory
after a calibration teach. For more information
about this command,
Physical Library on page 136.
As a result of restore, rescue, or revert operations,
the library shuts down. You must have physical
access to the library to bring the library back up.
If you are performing a restore, rescue, or revert
operation using remote access, the library will
remain shut down until the library is directly
powered back on.
Chapter 5 Maintaining Your Library
Maintenance Actions
seeSetting Up Policies for the
5
256