Quantum scalar i2000 User Manual page 274

Scalar i2000 User's Guide
Because the management control blade (MCB)
Note
determines the name of the restore image file, you
might not know the file name when you are
searching for it on the remote file system. The file
name always includes the library serial number,
date stamp, and time stamp, in that order and
separated by underscores.
An example file name might look like this:
213100020_2004-02-18_13.23.47.tar.gz
The serial number encoded in the image file must
match the library serial number. A serial number
mismatch will result in an message and the
operation will not continue.
When image file compatibility has been established, the library reboots
itself and continues with restoring the configuration. The reset operation
could take minutes to complete. If you are near the library and can see the
library's touch screen, normal behavior is when two "working" messages
appear and the touch screen goes dark when the LMC server restarts.
From the remote client, a message appears that indicates that the LMC
server is reconnecting to the client. After it reconnects, the LMC server
performs a discovery.
If the restore operation succeeds, a message appears that indicates that the
operation succeeded.
If the restore operation fails at any point, the library generates a RAS ticket
that contains details about the failure. Perform a revert or rescue operation
to return the library to a stable configuration.
7 After the restore operation has completed on the library, close and
restart the remote client.
8 If you have not done so already, make sure that the robotics are
enabled and bring the library back online so that data input and
output can continue.
Chapter 5 Maintaining Your Library
Maintenance Actions
261