Quantum scalar i2000 User Manual page 433

Scalar i2000 User's Guide
For DLT-S4 media barcodes, the library dynamically supports 1 to 14
characters for volume serial number plus a one-character or two-
character media type identifier. The media identifier can be either "4" or
"S4".
What barcode formats are supported?
external barcode label that is machine-readable to identify the volume
serial number. A barcode must use only uppercase letters A to Z and/or
numeric values 0 to 9. The library currently supports Code 39 (3 of 9) type
barcode labels.
What do I do if I lose my password?
they will tell you how to reset the password. See
Information or Help
What do I do if I lose power during a backup?
contains a redundant power supply, it is unlikely that power will ever be
completely unavailable to the library.
The library should recover even if power goes out completely during a
backup. If power remains off, press the Power button and leave it in the
off position until you can obtain a reliable power source. When the power
to the library is turned back on, the library will recover. You must re-run
the backup using your application software.
If the library does not automatically come back up after a power outage,
cycle library power. Cycling library power involves shutting down the
library, powering it off, and then powering it on. For more information,
see Shutting Down/Rebooting the Library
the Library on page 394, and
blue LED on the power supply will be on and not blinking.
Contact technical support and
on page 5.
Powering On the Library
Cartridges must have an
Getting More
If your library
on page 393, .Powering Off
on page 395. The
1
1
1
420