Chrysler 2005 Crossfire SRT6 Service Manual page 2442

9 - 518 ENGINE - ELECTRICAL DIAGNOSTICS
(P0521) ENGINE OIL SENSOR LEVEL PERFORMANCE (CONTINUED)
21.
INTERMITTENT WIRING AND CONNECTORS
The condition that caused this DTC to set are currently not present. Inspect the related wiring harness for a possible
intermittent condition.
Note: Check connectors — Clean/repair as necessary. Poor pin to terminal connections can set DTCs.
Note: Check for any Technical Service Bulletins that may apply.
Using the wiring diagram/schematic as a guide, inspect the wiring and connectors specific to this DTC. Wiggle the
wires while checking for shorts and open circuits.
Were there any problems found?
Yes >> Repair as necessary.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
No >> The condition that caused this DTC to set is currently not present. Inspect the related wiring harness for
a possible intermittent condition.
ZH