Chrysler 2005 Crossfire SRT6 Service Manual page 2437

ZH
(P0521) ENGINE OIL SENSOR LEVEL PERFORMANCE (CONTINUED)
11.
5-VOLT SUPPLY CIRCUIT SHORT TO GROUND
With the ignition off.
Measure the resistance between ground and the 5-Volt Supply circuit.
Is the resistance above 100 kohms?
Yes >> Go To 12
No >> Repair the 5-Volt Supply circuit for a short to ground.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
12.
5-VOLT SUPPLY CIRCUIT SHORT TO SENSOR GROUND CIRCUIT
With the ignition off.
Measure the resistance between the Sensor Ground circuit and the
5-Volt Supply circuit at the Oil Sensor harness connector.
Is the resistance above 100 kohms?
Yes >> Replace and program the Powertrain Control Module.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL
MODULES/POWERTRAIN
REMOVAL).
Perform POWERTRAIN VERIFICATION TEST - VER 2.
No >> Repair the 5-Volt Supply circuit for a short to the Sensor
Ground circuit.
Perform POWERTRAIN VERIFICATION TEST - VER 2.
ENGINE - ELECTRICAL DIAGNOSTICS 9 - 513
CONTROL MODULE -