Chrysler 2005 Crossfire SRT6 Service Manual page 2302

9 - 378 ENGINE - ELECTRICAL DIAGNOSTICS
(P0305) CYLINDER #5 MISFIRE (CONTINUED)
When Monitored and Set Condition
• When Monitored: Any time the engine is running, and the Target Learning Coefficient has been successfully
updated.
• Set Condition: When more than a 1.0% misfire rate is measured during two trips.
ENGINE CONTROL RELAY OUTPUT CIRCUIT
FUEL INJECTOR CONTROL CIRCUIT
FUSED IGNITION SWITCH OUTPUT CIRCUIT
COIL ON PLUG DRIVER CIRCUIT
ENGINE MECHANICAL PROBLEM
COIL ON PLUG
SPARK PLUG
FUEL STRAINER PLUGGED
RESTRICTED FUEL SUPPLY LINE
FUEL PUMP
FUEL INJECTOR
POWERTRAIN CONTROL MODULE
For a complete Powertrain Control Module Circuit Diagram, (Refer to 9 - ENGINE - SCHEMATICS AND DIA-
GRAMS).
Diagnostic Test
1.
CHECK FOR CURRENT DTC
Turn the ignition on.
With the DRB III , read PCM DTCs.
Is this DTC present?
Yes >> For complete diagnosis of this DTC, refer to (P0301) CYL-
INDER #1 MISFIRE.
No >> Go To 2
POSSIBLE CAUSES
ZH