Selecting The Source - Christie CP2000 User Manual

5.2 Selecting the
Source
C ontroller
LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)
For any display, the projector interprets incoming signal data according to one of 32
user-selectable display files defined at the time of installation (and/or with each
subsequent release of a new digital cinema feature), and stored in projector memory.
Each file is essentially a collection of processing/display settings optimized for a
particular cinema feature or alternative non-cinema content, enabling consistent
presentations with minimum further adjustment. Each file is represented by an
assigned "channel button" selectable over several pages of the TPC Main menu.
Depending on your installation, you may have 0-32 different non-cinema sources
defined for use.
TO SELECT A NON-CINEMA SOURCE
CP2000, use the main menu on the Touch Panel Controller to select the display
button representing the desired non-cinema source. Once selected, the button will
darken and the projected display will change according to the corresponding file
settings. See 3.5, Using the Touch Panel Controller if you need help.
TO RETURN TO A CINEMA SOURCE
select one of the cinema display buttons pre-configured for a cinema source input at
A B
port or —the CP2000 will now ignore the DVI ports and respond to the cinema
source activated by this button.
NON-CINEMA OPERATION
: With a non-cinema source connected to the
, at the Main menu of the Touch Panel Controller,
5-3