Messages With Multiple Parameters; Error Messages - Christie CP2000 User Manual

B.2 Messages with
Multiple
Parameters
Error Messages (ERR) 
LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)
Function Code / Examples
User ID (UID)
(UID "JSMITH" "PassWord")
Virtual Network (VNC)
requires v2.7 or higher and TPC 60/66
(VNC 1)
(VNC 0)
For single-parameter functions listed in Table B.1, you can determine the parameter's
range with the request message
For example:
(LPL?M)
(LPL!M000 5000)
If a function code has multiple parameters (see B.2, Messages with Multiple
Parameters, below), their ranges cannot be requested.
Certain messages are more complex and require multiple parameters in order to relay
complete information. These messages are described in detail below.
An error message is generated by the projector/TPC, and contains a numerical error
code, a message "specifier" (i.e., type of error, such as "System Error"), and a text
explanation of the error. In addition, "System Error" and "System Warning" error
messages also include further explanation of the nature of the error, such as its
location and cause. NOTE: The type of error and text parameters are enclosed
together in quotation marks, separated by a colon and space. In the table below, the
text explanation appears as -----.
Description and Parameters
P5 = Minute (0-59)
P6 = Second (0-59)
Allows remote access to a projector where a specific user
name and password is set up and required.
P1 = User Name (e.g., JSMITH — case insensitive)
P2 = Password (e.g., PassWord — case insensitive)
Start VNC server
NOTE: Should only be used for training
Reboots TPC
(ASCIICODE?M)
.
What is the minimum and maximum lamp limit?
Minimum lamp limit = 0, maximum lamp limit = 5000
Table B.2. Error Messages
ASCII MESSAGES
B-7