Specifications - Christie CP2000 User Manual

8.1

Specifications

Display 
Lenses 
LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)
NOTES: 1)
Due to continuing research, specifications are subject to change without notice.
2)
Specifications apply to all models unless otherwise noted. Refer to the separate CP2000-S
Addendum for Installation and Use for CP2000-S power related specifications.
Panel Resolution and Refresh Rate
Pixel format (H x V) on 3 DMDs
2D Refresh rate (DLP  Cinema  processing)
2D Refresh rate (non-cinema processing)
3D Refresh rate (24 Hz per eye)
Pixel Clock rate
Achievable Brightness
14 fL on 25m (75 ft.) screen (CP2000h/-S) or 17m (25 ft.) screen (CP2000i)
Achievable Contrast Ratio
2000:1 full on/off
Colors and Gray Scale
Displayable colors
Gray scale resolution
White Point
Nominal white
(full white after calibration, in telecine mode)
Gamma
2.6 (nominal)
Primary Zoom Lenses (Hi-contrast)
1.45 – 1.8:1
1.8 – 2.4:1
2.2 – 3.0:1
3.0 – 4.3:1
Opt. Anamorphic Lens **
1.25x (for 2.39:1 "scope" screen)
Maximum offsets are reduced when simultaneously offsetting horizontally and vertically
*
Anamorphic lens installs in the anamorphic adapter (optional) and is used in conjunction with a primary lens.
**
Specifications
2048 x 1080
23.97 – 48 Hz (SMPTE 292M) *
23.97 – 85 Hz (VESA DVI) *
96 Hz max.
150 MHz max.
requires maximum output conditions
35.2 trillion
15 bits each per RGB component
(45 total linear)
x = 0.314 ± 0.002
y = 0.351 ± 0.002
Part # Max. % of Image Offset from Lens Center *
38-809061-01 65% × (vertical), 52% Ö (horizontal)
38-809052-01 65% × (vertical), 52% Ö (horizontal)
38-809053-01 65% × (vertical), 52% Ö (horizontal)
38-8090xx-01 65% × (vertical), 52% Ö (horizontal)
Part # Max. % of Image Offset from Lens Center
38-809054-01 n/a (determined by primary lens)
S e c t i o n 8
8-1