Function Codes; B Ascii Messages - Christie CP2000 User Manual

B.1 Function
Codes
LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)
Use the following ASCII messages (function codes) for remote communications with
the TPC and its corresponding projector. All messages must be sent via Ethernet.
NOTE: Please refer back to 3.6, Remote Control of the TPC for a complete
explanation of remote communications setup, message protocol and format.
Function Code / Examples
Anamorphic Lens (AML)
(AML 0) or (AML 1)
(aml?)
Channel Icon (CHI)
(CHI S101 1)
(CHI 15)
(CHI?)
(CHI!004)
Channel Name (NAM)
(NAM S108 "Chicken Little") or
(NAMS108 "Chicken Little")
(NAM s1 "text")
Channel Selection (CHA)
(CHA ###)
(CHA?)
(CHA!S101)
Color Space Selection (CSP)
(CSP "P7v2")
(CSP?)
(CSP!"P7v2")
Data Format (DTF)
(DTF)
ASCII Messages
Table B.1. Function Codes
Description and Parameters
NOTE: Requires Motorized Anamorphic Lens Mount (optional).
Move the anamorphic lens out (0) or in (1), or request
status.
Assign second icon in list to represent channel 101.
Range = 0-15. Note the "S" required when specifying a
channel other than the current channel.
Assign 16
channel. Range = 0-15.
What is the current icon?
The 5 th icon represents the current channel
Name or rename a channel (display) button, always
preceded with "S" so that the name is assigned for this
source only.
(NAM "text") = assign name to the current channel
= assign a name to channel 1
(NAM s0 "text") = assign the same name to all channels
Selects between 1-132 channels on the TPC
What is the current channel?
Reply from proj. that new channel is 101 (first channel)
Range = 101-132
Set the color space (gamut, or TCGD) to P7v2
What color space is currently in use?
The P7v2 color space is currently in use
Selects the source type and packing mode for the current
input.
If cinema source A or B:
0x00 = 4:2:2 unpacked, 10-bits/color
0x01 = 4:2:2 packed, 12-bits/color
0x02 = 4:4:4 unpacked, 10-bits/color
0x03 = 4:4:4 packed, 12-bits/color
A p p e n d i x B
th icon in the list to represent the current
(256 characters max.)
(default)
B-1