BASIC OPERATION
TPC Diag Menu
TPC Interrogator Menu
3-56
The Status:Diag menu provides status information about projector components and
the current cinema source, and enables log files for each device to be saved to the
TPC's storage card for diagnostics.
The password-protected Status:Interrogator screen enables the collection of
advanced-level status information that can assist in the diagnostics of projector
components. Interrogator can be run in two modes and enables the collection of log
files only (Basic Mode) or log files plus registered batch files (Enhanced Mode).
These files are then stored on the TPC's storage card. For Interrogator to
successfully retrieve these diagnostic files, the projector must remain in its "failed"
state (with incorrectly displayed image on screen).
NOTES: 1) Always run Interrogator first before power cycling the projector,
otherwise important diagnostic files will be unusable. 2)
during a show as this could cause image disruption. 3) Interrogator is also
accessible through a separate login and password (different from the service login).
Contact Christie tech support for assistance and password.
Figure 3.24. Status:Diag Menu
Figure 3.25. Status:Interrogator Screen
Never run Interrogator
LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)