LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)
Figure 2.19. Check Voltage and Position Jumper
BALLAST 115 VAC TAPS
115V
COMMON
labeled
and
• If your measurement at the 115V terminal is
wires to the tap labeled
• If your measurement at the 115V terminal is
wires to the tap labeled
Figure 2.20. Check Voltage Between 115V and Common ("0V")
: Make sure your nominal line between the terminals
0V
(or
) is within 10% of 115 VAC. See Figure 2.21.
–10%.
+10%.
INSTALLATION AND SETUP
126.5V or more
, move the 115V
103.5V or less
, move the 115V
2-17