Summary Of Advanced Preferences Menu Functions - Christie CP2000 User Manual

LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)
Table 3.7. Summary of Advanced Preferences Menu Functions
ADVANCED / PREFERENCES MENU OPTIONS
Test Patterns
Full Screen
Alarm Triggers
Lamp Limit
Expiry Message
Language
System Calendar & Clock
* Screen Saver
*
NOTE: To use a unique screen saver, a user-defined .bmp must be downloaded to the TPC, replacing the default.
Display an RGB 12-bit test pattern, or turn patterns off. Always turn
OFF to resume normal operation.
Enter a checkmark to display test patterns in full 2048 x 1080
resolution. Clear the checkbox to work with cropping controls
for screen size and shape as desired. Note changes are
temporary, i.e. applied for the current test pattern only. This
control is not used for sources.
Choose which conditions you want to trigger an Alarm Window
(in addition to interlocks and problems with the SSM, I
lamp, which are all permanent triggers). It is recommended
that all triggers remain enabled during normal operation.
Disable only in an rare emergencies when the alarm appears to
be malfunctioning without real errors.
Enter the #hours (0-5000) that are expected for this lamp, typically
no more than the number of hours covered under warranty.
Enter a checkmark so that a Lamp Expiry Message will appear
on the TPC when the lamp reaches its defined Lamp Limit.
Choose English or Chinese TPC menu text for next re-boot.
Reset the system date/time as desired. Select the desired
component (date/hour/minute/second) and adjust. Save
(restart) with "Set" button.
Enable/disable a TPC screen saver, and set its start-up delay.
BASIC OPERATION
C, or
2
3-25