Tpc Main Menu; Main Menu Functions - Christie CP2000 User Manual

TPC Main Menu 
LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)
NOTE: The small Status and User buttons in the bottom corners do not affect the
projected display image.
TURN THE LAMP ON or OFF:
LOG ON:
By default, with no login, the TPC will offer only the three general user
menus intended for daily operation. If you need to access additional functions offered
in other menus, you must log on as a specific user with more rights. Press the user
level icon in the bottom right corner of any screen then enter the desired user name
and password in the text boxes provided.
OPEN or CLOSE THE DOUSER (SHUTTER):
muting and cooler stand-by mode, press the "raised" douser (shutter) key showing a
lens that is currently projecting light. Closing the douser slides a shutter blade in front
of the lens and reduces lamp power to 50% of its maximum rating (or 75% in
CP2000i models). To open the douser and restore previous lamp power, press the
"depressed" douser key showing a darkened lens with red warning circle.
MOVE THE ANAMORPHIC LENS:
lens: position it either in front of the primary lens to stretch the display horizontally,
or move it aside.
NOTE: For complete operating instructions, refer to the information supplied with
the Motorized Auxiliary Lens Mount.
SEE TEST PATTERNS:
To display a test pattern, press the Test Pattern button—repeat
to cycle through available test patterns. To return to a presentation, toggle the Test
Pattern button again or select one of the 8 display buttons from a Main menu page.
NOTES: 1) Allow 2-3 seconds for each test pattern to appear. 2) The number and
type of available test patterns depends on what the installer loaded during
installation. 3) Any user beyond the General User can also choose from the complete
range of test patterns offered in the password-protected Advanced menu.
Figure 3.5. Main Menu Functions
To toggle the lamp on/off, press and hold the lamp button.
To blank the display for instant picture
Toggle the current location of the optional auxiliary
BASIC OPERATION
3-11