Selecting Input Source For Sub - Christie LWU900-DS User Manual

STACK menu settings

3.5 Selecting input source for Sub

1.
Highlight SUB INPUT SOURCE in the STACK
menu with the ▲/▼ buttons, then press the ►
button to display the SUB INPUT SOURCE dialog.
2.
Use the ▲/▼ buttons in the dialog to highlight FOLLOW MAIN UNIT, FIXED
(COMPUTER IN) or FIXED (HDMI 1).
FOLLOW MAIN UNIT: Sets the input source on the Sub projector to the same
port as Main.
FIXED (COMPUTER IN): Sets the input source on the Sub projector to the
COMPUTER IN port which is connected to the MONITOR OUT port on the
Main projector.
FIXED (HDMI 1): Sets the input source on the Sub projector to the HDMI 1
port which is connected to the HDMI OUT port on the Main projector.
3.
Press the ◄ button to return to the previous menu, or press the ► button to
complete the setting. ( 20 )
• When the projectors are in the PbyP/ PIP mode, the SUB INPUT
NOTE
SOURCE is fixed at FOLLOW MAIN UNIT.
• If FIXED (COMPUTER IN) is selected, the COMPUTER IN port can be selected
as an input source on the Main projector. When any button to select an input
port on the remote control or the INPUT button on the projector is pressed, the
MAIN INPUT SOURCE dialog is displayed on screen.
• If FIXED (COMPUTER IN) is selected, the COMPUTER IN port on the Sub
projector should be connected to the MONITOR OUT port on the Main projector
with a computer cable. The image from the selected port is output from the
MONITOR OUT port on the Main projector to the COMPUTER IN port on the
Sub projector.
• If FIXED (COMPUTER IN) is selected, video signals can be input to the
COMPUTER IN port on the Main projector. Set the port for video signal input
in the COMPUTER IN menu and set the video format in the VIDEO FORMAT
menu. Refer to
Inputting an image from Main to Sub
image from Main to Sub - Video signal (either component or
LWU900-DS/LHD878-DS/LWU755-DS
User's Manual - Instant Stack Guide
( 25 ) and
18
Inputting an
video). ( 30 )
020-001617-01 Rev. 1 (12-2018)
LIT MAN USR DS Series ISG