Purchase Record, And Service Contacts; Ethernet Settings For This Projector - Christie CP2000 User Manual

1.3 Purchase
Record, and
Service
Contacts
1.4 Ethernet
Settings for
This Projector
LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)
LAMPS:
The two CP2000 models accommodate different lamps:
CP2000i Lamps
* For this projector, the 2.0 kW is available in CDXL only (maximum performance)
** Available as CDXL (maximum performance) or original CXL (less expensive).
OTHER:
Optional Christie components include other primary zoom lenses, a
motorized auxiliary lens mount and lens, DCP Librarian setup software, and high-
security locks. Refer to complete list in Section 8.
Whether the projector is under warranty or the warranty has expired, Christie's
highly trained and extensive factory and dealer service network is always available to
quickly diagnose and correct projector malfunctions. Complete service manuals and
updates are available to service technicians for all projectors.
Should you encounter a problem with any part of the projector and require assistance,
contact your dealer or one of the Christie service depots listed on the back cover of
this manual. In most cases, CP servicing is performed on site. If you have purchased
the projector, fill out the information on the following page and keep with your
records.
Dealer Phone Number:
Pedestal and Head Serial Numbers*:
Purchase Date:
Installation Date:
* NOTE: Both serial numbers are located at the rear of the projector.
The following Ethernet settings were defined during installation of the CP2000 and
the Touch Panel Controller:

Ethernet Settings for This Projector

Default Gateway
Subnet Mask
Touch Panel Controller device
Subnet Mask
CP2000h Lamps
2.0 kW * 2.0 kW **
3.0 kW ** 3.0 kW **
4.5 kW **
6.0 kW **
Refer to full specifications in Section 8.
Purchase Record
Dealer:
DNS Server
CP2000 Projector Address:
Projector
Touch Panel Controller Address:
INTRODUCTION
CP2000-S Lamps
2.0 kW **
3.0 kW **
4.5 kW **
6.0 kW **
1-3