BASIC OPERATION
3D Instructions
3-52
NOTES: 1) Assumes a full 2048 x 1080 display, and 3D enabled in the Custom 3D
Control menu. 2) 3D stereo sync or "reference signal" is part of input signal,
matching the vertical sync.
1. Connect two HD-SDI signals from a 3D media server to the projector's SMPTE
A
cinema ports
and
to either port; you will configure the projector to multiply and interleave the L/R
signals properly.
Figure 3.20. Single-input 3D Systems
B
. One carries left-eye data, the other right-eye data. Connect
LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)