Cinema Operation; Compatible Cinema Sources; Cinema Source Connections - Christie CP2000 User Manual

This section explains how trained operators can use the projector for presenting cinema events such as first-run
movies stored on a digital media storage device. Please read through these pages before displaying cinema for the
first time. A good understanding of all cinema functions and how to access them will help you to run an event
smoothly and easily.
NOTE: Before attempting cinema use, the projector must be properly installed, aligned and configured by a qualified
service technician as described in Section 2, Installation and Setup. Read also Section 3, Basic Operation.
4.1 Compatible
Cinema
Sources
LIT MAN USR CP2000
020-100032-04 Rev. 1 (03/14)

Cinema Operation

Make sure a digital media storage device or cinema server is connected to one of the
A B
or input ports within the CP2000 head—see Figure 4.1. These connections are
typically made at the time of projector installation.
Figure 4.1. Cinema Source Connections
A B
The identical or cinema ports use the SMPTE 292M bit-serial interface standard,
and will auto-detect cinema source formats shown in Table 4.1.
S e c t i o n 4
(EXTERNAL SOURCE SHOWN)
4-1