2 ) Detaching And Refitting The Switchback Separation Belts - Kyocera Mita DC-2560 Service Manual

( 2 ) Detaching and refitting the switchback separation belts

Clean or replace the switchback separation belts as follows.
Procedure
1. Remove the two screws holding the duplex unit front cover and detach the cover.
2. Loosen the three screws on the front and the two screws on the top to detach the
duplex unit cover.
Screws
Duplex unit cover
Screws
Figure 3-3-115
1AH
Screws
Front cover
3-3-117