Paper Conveying Section; 1 ) Detaching And Refitting The Conveying Belt - Kyocera Mita DC-2560 Service Manual

3-3-9 Paper conveying section

( 1 ) Detaching and refitting the conveying belt

Clean or replace the conveying belt as follows.
Procedure
1. Remove the image formation unit. (see page 3-3-29)
2. Remove the stop ring and front paper conveying guide.
3. Remove the screw and paper conveying unit.
Paper conveying guide
Screw
Stop ring
Figure 3-3-80
Paper conveying unit
1AH
3-3-87