Simulation; 1 ) Running A Simulation - Kyocera Mita DC-2560 Service Manual

3-2-1 Simulation

This copier has a simulation function that simulates various machine operations to check
and adjust each section.
(1) Running a simulation
Enter 10871087 with the numeric
keys.
Simulation mode is entered
and the copy number/zoom
ratio indicator shows U00.
Enter the number of simulation
to be executed with the
numeric keys.
The selected simulation number is
shown on the copy number/zoom
ratio indicator.
Press the print key.
The simulation is run.
Press the stop/clear key.
Yes
Run again?
Yes
Run another
simulation?
Enter 01 with the numeric keys
and press the print key.
Start
No
No
End
- - - - - - Simulation mode is entered.
- - - - - - U 0 0
- - - - - - A simulation is selected.
- - - - - - Simulation mode is exited.
1AH
3-2-1