7 ) Adjustments After Installing Rollers And Clutches - Kyocera Mita DC-2560 Service Manual

1AH

( 7 ) Adjustments after installing rollers and clutches

Perform the following adjustments after detaching and refitting the rollers and clutches.
(7-1) Adjusting the leading edge registration
Adjust the secondary paper feed timing if there is a regular error between the leading
edges of the original and the copy image.
Procedure
Enter simulation mode.
Enter 27 with the numeric keys.
Press the print key.
Select the mode No. with the ex-
posure adjustment keys.
Press the interrupt key.
Press the print key to make a test
copy.
Is the leading edge
of the copy image too short
(example 1)?
Is the leading edge
of the copy image too long
(example 2)?
B
3-3-18
Start
The current setting is displayed.
The copier enters ready mode.
Yes
No
Yes
No
A
* Mode 1: for copying at 100%
Mode 2: for enlargement copying
Mode 3: for reduction copying
Press the print key.
The new setting is stored.
Decrease the setting with the zoom
key.
Increase the setting with the zoom
key.