Drum Section; 1 ) Replacing The Drum - Kyocera Mita DC-2560 Service Manual

1AH

3-3-5 Drum section

( 1 ) Replacing the drum

Perform the following steps when cleaning or replacing the drum.
Precautions
• Avoid direct sunlight and strong light when detaching and refitting the drum.
• Hold the drum at the ends and never touch the drum surface.
• After removing the drum, keep it in the drum case or storage bag to protect the
surface from light.
Procedure
1. Open the front cover.
2. Remove the image formation unit from the machine. (see page 3-3-29)
3. Push up the blade attachment plate, slide the blade lever toward the rear side, take
the cleaning blade out of the drum.
Blade attachment plate
3-3-72
Image formation unit
Blade lever
Figure 3-3-65