Kyocera Mita DC-2560 Service Manual page 222

3. Remove the two screws and 8-pin socket from the rear of the cassette.
4. Remove the 8-pin paper width switch connector from the 8-pin socket.
* When refitting the 8-pin socket, keep the convex part toward the upper side.
5. Remove the three screws holding the width size changing knob.
6. While lifting the cassette lift in the direction of the arrow, remove the width size
changing knob.
Width size
changing knob
Cassette lift
Screws
8-pin paper width
switch connector
Figure 3-3-15
Convex
8-pin socket
1AH
Screws
3-3-13