3 ) Contents Of Simulation - Kyocera Mita DC-2560 Service Manual

1AH
(3) Contents of simulation
Sim.
No.
01 Canceling a simulation
1 Enter 01 with the numeric keys.
2 Press the print key.
* The copier returns to the normal mode.
02 Copying without paper
1 Place an original (A3/11" × 17" blank paper) on the
contact glass.
2 Enter 02 with the numeric keys.
3 Press the print key.
4 Select the original size with the original key.
5 Select the paper source with the paper select key.
6 After taking out selected cassette at the paper
source, reset the cassette.
7 Enter the number of copies to be made with the
numeric keys.
* Enter 250 to select endless copy mode.
8 Press the print key.
* The copying operation is started corresponding to
the selected condition. The copying operation is
repeated until the stop/clear key is pressed or the
preset number of copies are made.
9 Press the stop/clear key.
* The copying operation stops.
0 Press the stop/clear key.
03 Copying at standard zoom ratios
1 Enter 03 with the numeric keys.
2 Press the print key.
3 Place an original on the contact glass.
4 Select the paper source with the paper select key.
3-2-8
Description Remarks
Checks
mechanical
operation.
Checks
enlargement/
reduction
copying
operation.