Paper Feed Section; 1 ) Detaching And Refitting The Forwarding, Upper And Lower Paper Feed Pulleys; Removing The Primary Paper Feed Unit - Kyocera Mita DC-2560 Service Manual

3-3-2 Paper feed section

( 1 ) Detaching and refitting the forwarding, upper and lower paper feed pulleys

Clean or replace the forwarding, upper and lower paper feed pulleys as follows.

(1-1) Removing the primary paper feed unit

Procedure
1. Remove the first cassette. (see page 3-3-12)
2. Open the right cover of the copier.
• When removing the primary paper feed unit of the first cassette.
3. Open the front cover of the copier. Remove the screw holding the primary paper
feed unit and then the unit.
• When removing the primary paper feed unit of the second cassette.
3. Draw the second cassette. Remove the screw holding the primary paper feed unit
and then the unit.
Primary paper feed unit of the first cassette
Primary paper
feed unit
Screw
Front cover
Second cassette
Primary paper feed unit of the second cassette
Figure 3-3-1
Right cover
Right cover
Primary paper feed unit
Screw
1AH
3-3-3