5 ) Detaching And Refitting The Heat Roller - Kyocera Mita DC-2560 Service Manual

( 5 ) Detaching and refitting the heat roller

Clean or replace the press roller as follows.
Procedure
1. Remove the fixing unit from the machine. (see page 3-3-90)
2. Take out the fixing heater. (see page 3-3-90)
3. Open the fixing unit. (see page 3-3-95)
4. Remove the two screws and the upper fixing guide plate.
Upper fixing guide plate
Screw
Figure 3-3-92
Screw
3-3-97
1AH