Adjusting Longitudinal Magnification (Scanning Speed) - Kyocera Mita DC-2560 Service Manual

(12) Adjusting longitudinal magnification (scanning speed)

Procedure
Enter simulation mode.
Enter 26 with the numeric keys.
Press the print key.
Place the NTC on the contact
glass and ensure there is A3/11" ×
17" paper present.
Press the interrupt key.
Press the print key to make a test
copy. (A test copy is made)
Is the image longer
longitudinally than
the original?
Is the image shorter
longitudinally than
the original?
Press the stop/clear key.
Exit simulation mode.
Start
· · · · · · ·
· · · · · · ·
Yes
No
Yes
No
End
The current setting is displayed.
Press the print key.
The new setting is stored.
The copier enters ready mode.
Decrease the setting with the zoom
key.
Increase the setting with the zoom
key.
* Setting range: 0~30
Reference: 14
Changing the value by one changes
the scanning speed by 0.2%.
* The larger the value, the longer the lon-
gitudinal length of the image; the small-
er the value the shorter the image.
1AH
3-3-69