Kyocera Mita DC-2560 Service Manual page 313

1AH
5. Remove the C-circlip on the front of the fixing unit, and the heat roller bushing.
6. Remove the C-circlip on the rear of the fixing unit.
Remove the heat roller gear 40, the heat roller bushing, and then the heat roller.
* When fitting the heat roller bushing, fit it the part indicated with the arrow in figure
toward the lower side with closing the unit.
Heat roller
7. Refit all the removed parts.
3-3-98
Heat roller bushing
Heat roller gear 40
C-circlip
Heat roller bushing
Figure 3-3-93
Heat roller