( 3 ) Detaching And Refitting The Upper And Lower Paper Width Switches (For Inch Models Only) - Kyocera Mita DC-2560 Service Manual

1AH
( 3 ) Detaching and refitting the upper and lower paper width switches
(For inch models only.)
Check or replace the upper and lower paper width switch as follows.
Caution: After replacing a paper width switch, be sure to perform ( 5 ) Adjusting the
position of the width size changing knob. (see page 3-3-16)
Procedure
1. Draw out the cassette.
2. Remove the four screws and take the cassette out of the copier.
Cassette
3-3-12
Screws
Figure 3-3-14
Screws